Circulator Pump, Closed Loop, 1/6 Hp, Voltage 230, 1 Phase, Amps 1.7 Max, Inlet/outlet Gf 50 In 2-bolt Flange, Cast Iron Housing Material, Face To Face Dimension 8-1/7 In., Max. Temp. 230 F, Max. Working Pressure 145 Psi, Pes Composite Impeller Material, Auto Thermal Protection, Wet Rotor Mechanical Seal

Tubeaxial Fan, Hazardous Location, Belt Drive With Drive Package, Propeller Dia. (in.) 18, Cfm @ 0.000-in. Sp 3494, Sones @ 0.250-in. Sp @ 5 Ft. 24, Max. Inlet Temp. (deg. F) 200, Max. Ambient Temp. (f) 104, Voltage 208-230/460, 60/50 Hz, 3 Phase, Full Load Amps 2.3-2.4/1.2, Motor Hp 1/2, Motor Type Hazardous Location, 3-phase, Motor Enclosure Totally Enclosed Fan Cooled, Max. Bhp 0.48, Motor Rpm 1725, Fan Rpm 1487, Bearing Type Ball, Shaft Dia. (in.) 7/8, Height (in.) 31

The Starrett F2740-1M metric Wisdom Plus Electronic Indicator has a resolution of 0.02 mm, accuracy of + or - 2 resolutions, and a total measurement range of 0 - 50 mm. The digital display has a sealed housing with a glass scale design, minimum, maximum, and last read hold, and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The display flashes when user-defined tolerances are exceeded, and the total indicator reading (TIR) capability displays the absolute difference between the highest and lowest readings. The 5-3/4” (146-mm) rectangular housing has a rotating bezel, a rear mounting bracket with a 1/4” (6-mm) diameter hole, and an output jack that allows for data transmission to PC compatible RS-232C (serial port) supported devices... Less

Motor Starter, Nema, Non Reversing, Nema Size 4, Nema Enclosure Type Open, Coil Volts 120vac, 60 Hz, Number Of Poles 3, 135 Amps Ac, Aux. Contact Configuration 1no, 40 Hp @ 3 Phase - 208v, 50 Hp @ 3 Phase - 230v, 100 Hp @ 3 Phase - 460v, 100 Hp @ 3 Phase - 575v, Height (in.) 11.06, Width (in.) 4.5, Depth (in.) 5.75, Standards Ul/csa

Motor Starter, Nema, Non Reversing, Nema Size 3-1/2, Nema Enclosure Type Open, Coil Volts 120vac, 60 Hz, Number Of Poles 3, 115 Amps Ac, Aux. Contact Configuration 1no, 30 Hp @ 3 Phase - 208v, 40 Hp @ 3 Phase - 230v, 75 Hp @ 3 Phase - 460v, 75 Hp @ 3 Phase - 575v, Height (in.) 9.78, Width (in.) 4.5, Depth (in.) 5.19, Standards Ul/csa

The Starrett F2740-1M metric Wisdom Plus Electronic Indicator has three user-selectable resolutions with a maximum resolution of 0.002-mm, accuracy of + or - 2 resolutions, and a total measurement range of 0 - 50 mm. The digital display has a sealed housing with a glass scale design, minimum, maximum, and last read hold, and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The display flashes when user-defined tolerances are exceeded, and the total indicator reading (TIR) capability displays the absolute difference between the highest and lowest readings. The 5-3/4” (146-mm) rectangular housing has a rotating bezel, a rear mounting bracket with a 1/4” (6-mm) diameter hole, and an output jack that allows for data transmission to PC... Less

Rigid Shaft Coupling, One Piece Clamp Type, Without Keyway, Bore Dia 50 Mm, Overall Length 124 Mm, Outside Dia 85 Mm, Clearance Dia 94.20 Mm, Screw Size M10, Max Torque 13500 In-lb, Black Oxide Steel

Rigid Shaft Coupling, Two Piece Clamp Type, With Keyway, Bore Dia 50 Mm, Overall Length 124 Mm, Outside Dia 85 Mm, Clearance Dia 94.20 Mm, Screw Size M10, Keyway Width 14 Mm, Max Torque 13500 In-lb, Black Oxide Steel

Rigid Shaft Coupling, One Piece Clamp Type, With Keyway, Bore Dia 50 Mm, Overall Length 124 Mm, Outside Dia 85 Mm, Clearance Dia 94.20 Mm, Screw Size M10, Keyway Width 14 Mm, Max Torque 13500 In-lb, Black Oxide Steel

The Starrett F2740-1 Wisdom Plus Electronic Indicator has six user-selectable resolutions with a maximum resolution of 0.0001” (0.002 mm), accuracy of + or - 2 resolutions, and a total measurement range of 0” - 2” (0 - 50 mm). The digital display has a sealed housing with a glass scale design, minimum, maximum, and last read hold, and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The display flashes when user-defined tolerances are exceeded, and the total indicator reading (TIR) capability displays the absolute difference between the highest and lowest readings. The 5-3/4” (146-mm) rectangular housing has a rotating bezel, a rear mounting bracket with a 1/4” (6-mm) diameter hole, and an output jack that allows for data transmission... Less

Illuminance Meter T-10WL (10M) Includes T-10 Main Body; T-10Wl Receptor & standard accessories (Cat# 1876-244)

SMC AF50-N10D-8Z PRODUCT DESCRIPTION: AIR FILTER, MODULAR STYLE, 150 PSI, 140 DEG. F / MAX TEMP PRODUCTION CONDITION: FACTORY NEW IN AUTOMATIONRECOVER Y.COM PACKAGING

K-39AF-7 AUTOFEED Sink Machine with Slide Action Chuck, (C-1IC) 5/16" x 25 Inner Core Cable, (C-6) 3/8" x 35 Cable, (C-21) 5/16" x 50 Cable with Inner Drum, Five-Piece Tool Set and Carrying Case. Features: Excellent for small line cleaning. Opens clogged lavatory, sink lines, urinals, and tub/shower drains. Available in 2 styles: Manual & AUTOFEED. Lightweight, easy-to-use, no set up required. Variable speed power unit rotates cable 0-450 RPM’s. Two piece twist lock canister with interchangeable inner drum. Drum Capacity: 50 of 5/16" (15m/8mm) or 35 of 3/8" (11m/10mm). CSA approved.

LUMINANCE METER LS-110 (Cat# 1842-265)

Backer Pad for SRSVPD2 Polishing Disks Use for Concentrated Scratch Polishing Pads Lock on with Velcro Backing The CRL SRSVPB2 is the 2" (50mm) Backer Pad for use with SRSVPD2 Polishing Disks. These two components are part of the CRL Scratch Polishing System SRS1. These 2" backer pads grip the polishing disks with a sturdy velcro that holds tightly at full RPM. The 2" option is for tightly targeted scratch and rub polishing with no need for feathering.

This is a brand new CEM DT-8839 CE certified digital non-contact infrared thermometer with built-in laser pointer and back-light LCD display. This top-of-the-line device has a super narrow 50:1 distance to spot ratio and a wide range of -58 oF to 1832 oF (-50 oC to 1000 oC). This newly designed digital light-weight device gives you long lasting power with accurate measurements from a safe distance. The built-in dual laser pointers help you aim better at the target for an accurate result. The back light LCD screen allows you to read easily in the dark. FEATURES * Non-contact Infra-Red thermometer with laser pointer measures to 1000oC / 1832oF * Easy to use for measuring temperature of hot or moving objects from a safe distance * Super narrow 50:1 field of view (measure 1 target at 50... Less

This very aggressive segmented profile tool allows you to use your router to grind your stone edges completely flat to a single plane. Just run the bottom bearing on them against a straight edge and it makes grinding straight edges foolproof.These 1" diameter diamond router bitss have a useable height of 50mm (2"), so you can use them on any 2cm, 3cm, 4cm or 5cm stone thicknesses. Just make sure the bottom bearing is running along your straight edge and you can't do this wrong! This diamond profiling bit comes with both an 8mm and a 10mm arbor bolt so you can use it on a variety of machines like Sector, Master or many others.

LUMINANCE METER LS-100 (Cat# 1842-165)

Shoulder Screw, Standard, Alloy Steel, Plain Finish, Head Style Knurled, Thread Size M8 X 1.25mm, Drive Type Hex Socket, Drive Size 5mm, Shoulder Dia. 10mm, Shoulder Length 30mm, Thread Length 13.25mm, Head Dia. 16mm, Head Height 7mm, Shoulder Length Tolerance +0.25mm, Screw Head Dia. 16mm, Min. Tensile Strength (psi) 160,000, Shear Strength (psi) 96,000, Temp. Range (f) 50 To 550, Class 4g6g, Rockwell Hardness 36 To 43, Meets/exceeds Ansi B18.3.3m/iso7379, Package Quantity 50

Shoulder Screw, Standard, Alloy Steel, Plain Finish, Head Style Knurled, Thread Size M6 X 1.0mm, Drive Type Hex Socket, Drive Size 4mm, Shoulder Dia. 8mm, Shoulder Length 30mm, Thread Length 11.25mm, Head Dia. 13mm, Head Height 5.5mm, Shoulder Length Tolerance +0.25mm, Screw Head Dia. 13mm, Min. Tensile Strength (psi) 160,000, Shear Strength (psi) 96,000, Temp. Range (f) 50 To 550, Class 4g6g, Rockwell Hardness 36 To 43, Meets/exceeds Ansi B18.3.3m/iso7379, Package Quantity 50

FYH Bearings Cartridge Mounted Bearing Cylindrical bore (with set screws) 50mm Inner Diameter Bearing This round cartridge unit is machined with h7 accuracy and allows for shaft expansion and contraction in an axial direction. Available in normal, medium and heavy duty units. * d = 50mm * H = 140mm * A = 40mm * r = 3mm * B1 = 61mm * Unit No = UCC310 * Bearing No = UC310 * Basic Load kN (Cr)= 62 * Basic Load kN (Cor)= 38.3

This aggressive segmented profile tool allows you to use your router to grind your stone edges completely flat to a single plane. Just run the bottom bearing on them against a straight edge and it makes grinding straight edges foolproof.These 1 1/2" diameter diamond router bitss have a useable height of 50mm (2"), so you can use them on any 2cm, 3cm, 4cm or 5cm stone thicknesses. Just make sure the bottom bearing is running along your straight edge and you can't do this wrong! This diamond profiling bit comes with both an 8mm and a 10mm arbor bolt so you can use it on a variety of machines like Sector, Master or many others.

Accessory Kit, 50mm, For Use With 2ge29, Application Testing Bond Strength Of Finishes On Wood, Concrete And Plastic., Includes (12) 50mm Aluminum Test Dollies, 50mm Stand Off And 50mm Hole Saw

5" Direct Drive Liquid Actuated Dial Thermometer. Case of Type 302 Stainless Steel. Stem of Type 303 Stainless Steel (Type 316 Stainless Steel optional). Fitting is 1-1/4" - 18 swivel nut (Type 316 Stainless Steel optional). Dial face features black lines and numbers on a white background, a black pointer, and a linear scale. Crystal is heavy molded glass, thick gasket sealed, and waterproof (Plexiglass optional). Bulb is 0.625" (15.9mm) diameter, tapered bulb chamber to 0.437" (11.1mm). External calibration screw on back of case. Accuracy within one scale division. Stem Lengths: Standard Lengths from 6". Direct-Drive Double-Wound Bourdon Coil - With this type of construction, the pointer shaft operates directly from the center coil. This eliminates the conventional sector and pinion type... Less

5" Direct Drive Liquid Actuated Dial Thermometer. Case of Type 302 Stainless Steel. Stem of Type 303 Stainless Steel (Type 316 Stainless Steel optional). Fitting is 1-1/4" - 18 swivel nut (Type 316 Stainless Steel optional). Dial face features black lines and numbers on a white background, a black pointer, and a linear scale. Crystal is heavy molded glass, thick gasket sealed, and waterproof (Plexiglass optional). Bulb is 0.625" (15.9mm) diameter, tapered bulb chamber to 0.437" (11.1mm). External calibration screw on back of case. Accuracy within one scale division. Stem Lengths: Standard Lengths from 6". Direct-Drive Double-Wound Bourdon Coil - With this type of construction, the pointer shaft operates directly from the center coil. This eliminates the conventional sector and pinion type... Less

Brake, Double C-face Magnetic Disc, Static Torque 50 Ft.-lb., Shaft Dia. 1 3/8 In., Dripproof Enclosure, Continous Duty, 208-230/460 Voltage @ 60 Hz, 174-190/380 Voltage @ 50 Hz, Single Phase, Max. Rpm 3600, Max. Hp @ 1725 Rpm 10, Max. Hp @ 3450 Rpm 20, Ambient 40 Degrees C, 60/50 Hz, 0.6/0.3 Amps Holding, 5.3/2.7 Inrush Amps, 1.4 Service Factor, 213/215tc Nema/iec Frame, Power Lead Length 18 In., Red Primer/aluminum Finish, Length 8-1/8 In., Dia. 8.57 In.

Round Air Cylinder, Double Acting, Stainless Steel, 50mm Bore Dia., 100mm Stroke, Rear Pivot Mount Mount, Features Air Cushion, 145 Max. Pressure (psi), Mounting Style Double End, Cushion Type Air Cushion, 1/4 In. Npt Cylinder Ports (in.), 14 To 140 Operating Temp. Range (f), 304mm Total Length (in.), Magnetic, Stainless Steel Body Material, Stainless Steel, Stainless Steel, N, Stainless Steel, 20mm Rod Dia. (in.), M18 X 1.5 Rod Thread (in.), 35mm Rod Thread Length (in.)

Air Cylinder, Double Acting, Round, 50mm Bore Dia., 50mm Stroke, 145 Max. Pressure (psi), Mounting Style Basic Mount, Cushion Type Air Cushion, 1/4 In. Npt Cylinder Ports (in.), 14 To 140 Operating Temp. Range (f), 217mm Total Length (in.), Non-magnetic, Stainless Steel Body Material, Stainless Steel, Stainless Steel, N, Stainless Steel, 20mm Rod Dia. (in.), M18 X 1.5 Rod Thread (in.), 35mm Rod Thread Length (in.)