Building Supplies

Hand and Power Tools

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Size: 3-3/4" Center to Center / 5-1/2" Overall Length Finish: Antique Copper Decorite: 7417-ac All cabinet hardware comes with screws. Our finishes are designed and tested to withstand corrosion by moisture and salt air. When properly maintained, our finishes resist abrasion and enhance the luster and exquisite beauty of our products for years. All our die-cast, stamped and solid brass products are protected by triple treatments of long-lasting genuine laquer which is the only coating designed to enhance the finish without discoloring. Unlimited lifetime guarantee. Ships in 3 to 5 business days.

Curtronizer NSF APPROVED OFFICE, RESTAURANT AND FREEZER STRIP CURTAIN DOOR The Perfect Door For Office Or Room Dividers, Restaurants And Freezers. The Curtronizer Strip Door is one of the fastest, easiest strip door kits in the industry. NSF Approved Strip Traffic Doors separate environments from temperature, weather, noise, dust, and other airborne pollutants, making them the perfect doors for office areas, room dividers, restaurants, walk-in coolers, and freezers. USDA Low Temperature Polar Reinforced Strips are for Cooler and Freezer door use (temperature resistant from -20 to +140 degrees F). Pre-punched 6 wide x 0.06 thick strips are mounted on 2 centers allowing for a 67% (2) overlap for secure sealing. Interior strip curtain door kits can be easily trimmed... Less

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Vestige widespread hex wrench

Uvex SEPTLS763S2154 Patented MMT Multi-Material Technology provides soft, cushioned comfort. Wrap-around 8-base lens design offers exceptional coverage. Ratcheting temple angle adjustment. Ventilation channels minimize fogging. Elastomer nasal pads minimize slippage.

Fasco Centrifugal Blower - 115 Volts 1200/1400 RPM Features Sleeve Bearings

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

MoistureWick Brow Accessory Absorbs And Wicks Away Perspiration To Keep Lenses Clear In Hot Environments. MoistureWick Is Both Removable And Replaceable, Extending The Life Of The Eyewear Featuring Uvextreme Plus Lens Coating, Our Longest Lasting Anti-Fog Coating GripClick Frame Width Adjustment Ensures A Comfortable Fit For All Face Sizes FlexFit Bendable Temples And Nosepiece For A More Comfortable, Customized Fit Ratcheting Temples Make It Easy To Adjust The Lens Angle For A Close Fit, Manufacturer: Uvex

Fastener Crown Length 7/16". Fits Bostitch Tools PC1000, PC2000, PC4000, PC4000-OC1, PC5000, H30-8, P6C-8, USO56-1. Leg Length 1/2". Quantity Per Item Pack 4,000. Staple Wire Gauge .050" x .019".

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Spacers and standoffs are useful for applications such as separating devices, connecting parts, and locating and guiding components in assemblies. Threaded spacers are called standoffs, all standoffs have a Class 2B thread. Choose hex standoffs when you need to use a wrench. Nylon 6/6 is corrosion resistant, tough, and resilient. Ideal in electrical and electronic assemblies. Withstands temperatures from -40 Degreess to +180 Degreess F. Rockwell hardness is R100. Not rated for tensile strength. Standoffs have both male and female threads.