Building Supplies

Screws

Brand: Mid-America. Painted metal screws are typically used by home improvement contractors to install exterior vinyl shutters. These screws are color coordinated to match Mid-America brand vinyl shutters. See site for additional colors.

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head that allows for simple "by-hand" installation. The thumb screw has a diamond knurled surface on its head. This gives it better gripping surface, making it easier to tighten or loosen the fastener manually. Free-machining brass, also known as alloy 360, is the most commonly used brass alloy. It resists corrosion and is nonmagnetic. Combined with a precision- machined finish, it also offers a decorative gold color for a finished look. A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine.

Brand: Mid-America. Painted metal screws are typically used by home improvement contractors to install exterior vinyl shutters. These screws are color coordinated to match Mid-America brand vinyl shutters. See site for additional colors.

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc. Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. A threaded fastener's size name includes... Less

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head which allows for simple "by-hand" installation. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austeni tic Stainless Steels are designated by a 3 digit SAE Stainless Steel... Less

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head that allows for simple "by-hand" installation. The thumb screw has a shoulder that provides a good bearing surface and also makes the head easier to grip. The head has a diamond knurl, which also offers a gripping surface and makes it easier to tighten or loosen the fastener manually. Free-machining brass, also known as alloy 360, is the most commonly used brass alloy. It resists corrosion and is nonmagnetic. Combined with a precision- machined finish, it also offers a decorative gold color for a finished look. A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it... Less

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc. Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. A threaded fastener's size name includes... Less

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc. Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. A threaded fastener's size name includes... Less

100 x Pan-Head Screws (6/32 x 0.25 ) for IBM 59P5224 / 007N281 / 73P8007 Hard Drive Trays - Brand New

The Kreg SDK-C2SS-100 is a Pack of 100 2-Inch #8 Course Pan Head Deck Screws. Kreg Deck Screws were designed specifically for use with the Kreg Deck Jig, and they can also be used as simple face-screws for a variety of outdoor projects. These screws are made from a highly weather- resistant Stainless Steel, providing the ultimate protection against rust and corrosion.   Features: 100 Screws Stainless Steel for the highest possible rust and corrosion resistance Flat bottom head creates secure hold, won't split the workpiece Self-Tapping tip drills a hole while it's driven KTX Square Drive provides incredible cam-out resistance, less spinning, more driving What's In the Box: Kreg SDK-C2SS-100 2-Inch #8 Course Pan Head Deck Screw 100-Count

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head which allows for simple "by-hand" installation. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austeni tic Stainless Steels are designated by a 3 digit SAE Stainless Steel... Less

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head that allows for simple "by-hand" installation. The screw’s head has a diamond knurled surface for extra grip. The thumb screw head and body are machined from Nylatron, a nylon 6/6 plastic that offers high strength and rigidity. It also resists high temperatures, making it suitable for a range of environments. It has a plain finish. A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine.

Hex Head Cap Screw, Head Type Standard, Type High Strength, Grade 8, Comparable To Property Class 10.9, Alloy Steel, Finish Plain, Thread Size 1/2-20, Thread Type Unf, Length Under Head 2 1/4 In, Thread Length 1 1/4 In, Head Height 5/16 In, Head Width 3/4 In, Thread Style Partially Threaded, Thread Direction Right Hand, Class 2a, Tensile Strength 150,000 Psi, Rockwell Hardness C33 To C39, Meets/exceeds Sae J429 And Asme B18.2.1, Refills 2ee55, Package Quantity 225

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft. Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. The Nylon Tip is softer than metal and provides vibration damping and noise reduction. A threaded fastener's size name includes information about the major external... Less

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austeni tic Stainless Steels are designated by a 3 digit SAE... Less

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE... Less

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE... Less

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austeni tic Stainless Steels are designated by a 3 digit... Less

Manufacturer: Spax

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austeni tic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention... Less

License plate frame/cover fasteners Includes 4 screws w/ security pattern, 4 inserts, and key/wrench Helps prevent plate theft Replaces part number 81230

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

Black Nylon 6/6 Machine Screw, USA Made, Hex Head, #4 - 40, 1-3/16" Length, Fully Threaded (Pack of,100)

Hex Head Cap Screw, Medium Strength, Class 8.8, Comparable To Grade 5, Steel, Zinc Plated Finish, Thread Size M5x0.80mm, Thread Type Metric, Length Under Head 8mm, Head Height 3.5mm, Head Width 8mm, Fully Threaded, Right Hand Thread Direction, Thread Class 6h, Tensile Strength 116,000 Psi, Rockwell Hardness C22-c32, Meets/exceeds Din 933, Package 100