Building Supplies

Nuts and Bolts

RED STEEL SAFETY BOLLARDS WITH REMOVABLE RUBBER CAP Heavy duty welded steel makes this safety bollard ideal for protecting personnel, racking and machinery indoors and outdoors. Security bollard includes a removable rubber cap that allows bollard to be filled with concrete for extra reinforcement. Base plate includes 4 openings to accept mounting bolts (sold separately). Heavy duty welded steel bollard has a high visibility red powder coat finish.

U Bolt, Square Bend, 304 Stainless Steel, Plain Finish, 3/8-16 In Thread Size, 3 3/4 In Thread Length, 6 5/8 In Inside Length, 7 In Overall Length, 8 In Inside Width, Includes 2 Nuts, 2 Washers

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc. Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. A threaded fastener's size name includes... Less

Ideal for lightweight café or louvered doors 3/4-Inch to 1-1/8-Inch thick. Installation instructions and hardware included Installation instructions and hardware included Bright brass finish Screws included, Manufacturer: Crown Bolt

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.Class 8.8 fasteners are typically made of medium-carbon steel that is quenched and tempered, with 580-600 MPa proof load and 800-830 MPa tensile strength. It is commonly used in the automotive industry and other situations in which strength is a moderate concern. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.Hex head fasteners can be driven with... Less

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc. Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. A threaded fastener's size name includes... Less

Thanks to KEYPOUT, any chance of someone breaking into your home using a Bump-Key is eliminated. This versatile product is easy to use and is merely placed over your doorknob and deadbolt to completely prevent either from turning while you're away. Of course, what this means is that even those who have a key to your home or apartment will also be denied entry, so any pest control people or landlords capable of entering your property at any time will have another thing coming to them.

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc. Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. A threaded fastener's size name includes... Less

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and... Less

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austeni tic Stainless Steels are designated by a 3 digit SAE... Less

Lever Extension Flush Bolt, Material Brass, Satin Chrome Finish, Height 6 3/4 In, Width 1 In, Throw Size 3/4 In, Bolt Head Dia 1/2 In, Bolt Length 1 1/4 In, Includes Strike, Guide, And Fasteners

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE... Less

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and... Less

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE... Less

Carriage Bolts or Carriage Screws have a square neck that keeps them from turning once tightened. Use in square holes for wood-to-wood and wood-to-metal fastening. Length is measured from under the head.Grade 5 fasteners are typically made of medium-carbon steel that is quenched and tempered for added strength. They are commonly used in the automotive industry and other situations in which strength is a moderate concern, and are grade-marked on the head with three radial lines. Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in... Less

Brass snap with 1" swivel eye, 3" overall.

Fimco 3/8"-18 x 5" carriage bolt for Fimco 25-gallon ATV boom sprayer (Item No. 126068).

This two wide modular drawer cart includes (2) 3" high, and (8) 5" high roller bearing drawers that are 14" wide x 23" deep. All steel drawers have 20" roller bearing slides with a 75 pound capacity. Drawers have a simple bolt together design which will allows drawers to be added to or reconfigured at any time. All drawer units include (4) 4" swivel locking casters and push handle for easy movement when necessary. 48.00 L. 40.00 W. 40.00 H.

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austeni tic Stainless Steels are designated by a 3 digit... Less

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.Monel, also known as Nickel-Copper Alloy 400, has exceptional strength and resistance to heat and corrosion. It is slightly magnetic, and is especially well suited for use near salt water. In comparison to steel, Monel can be difficult to machine and needs to be worked at slow speeds. Rockwell hardness is a minimum of B80, and minimum tensile strength is 80,000 psi. Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is... Less

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common... Less

Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head.Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.A threaded fastener's size name includes information about the major external diameter (in... Less

Add style and security to your gate or door with the Detailed Slide Bolt. Made of solid bronze, this surface bolt will make the perfect finishing touch. Made of solid bronze. Available in Living Bronze finish. Living Bronze is a distressed living finish over solid bronze. Natural variations should be expected. Because it is a living finish, this finish will change over time. Overall measurements: 5" L x 1-1/2" H and projects 1-1/2". Includes fastening hardware.